PlymakerShoe-rack reference run
Score100/100
Shelf geometry6.6° · 30 mm rear gap
Mechanical joints6 dados · 2 rabbets
3D conflicts0 conflicts
Connected6/6 connected
Download STEP
Hover for part or edge ID · click to select · drag to orbit
No item selected
6 dados · 2 rabbets · cut solids

Checks

  • PassNo unexplained 3D overlap0 conflicts
  • PassInside the six-plane envelope800 × 350 × 720 mm
  • PassEvery part connected to ground6/6 connected
  • PassShelves use dados, not butt joints6 dados · 243113 mm³ removed
  • PassBack is captured in rabbets2 rabbets
  • PassShelves slope down and clear the back6.6° · 30 mm rear gap
  • PassShelf clearance172 mm minimum
  • PassShoe capacity9 estimated pairs
  • PassRepeated shelf family3 linked cut-list parts
  • PassCut list includes machining8 joint features

Cut list

PartQtySize (mm)Machining
back1776 × 650 × 9—
shelf3776 × 262.7 × 18—
side2320 × 650 × 18stopped dado 6 mm deep × 18.2 mm wide × 262.7 mm long for shelf; through rabbet 6 mm deep × 9.2 mm wide × 650.0 mm long for back

Perturbations

  • Pass+50 mm envelope width
  • Pass+1 mm material thickness
  • Passdeterministic replay
Reference transcript · 21 public commands
  1. create-projectproject
  2. set-envelopeenvelope
  3. add-materialmaterial
  4. add-materialback-material
  5. add-datumdatum-shelf-1
  6. add-datumdatum-shelf-2
  7. add-datumdatum-shelf-3
  8. add-anchored-panelleft-side
  9. add-anchored-panelright-side
  10. add-anchored-panelback
  11. add-housed-jointrabbet-back-left
  12. add-housed-jointrabbet-back-right
  13. add-anchored-panelshelf-1
  14. add-housed-jointdado-shelf-1-left
  15. add-housed-jointdado-shelf-1-right
  16. add-anchored-panelshelf-2
  17. add-housed-jointdado-shelf-2-left
  18. add-housed-jointdado-shelf-2-right
  19. add-anchored-panelshelf-3
  20. add-housed-jointdado-shelf-3-left
  21. add-housed-jointdado-shelf-3-right